Our REC solar panels are high performance and made from quality crystalline cells. Each cell is individually tested and power matched to ensure consistent performance between the cells of the panel. Seilar panels are designed to be durable and engineered to meet the highest quality standards and provide a stable, consistent power output.
The ABB PVI-5000-TL-OUTD inverter is well suited for most small sized rooftop installations. This rugged outdoor inverter has been designed as a completely sealed unit to withstand the harshest environmental conditions.
Our extensive network of Seilar Dealers is qualified to assess your home and provide you with the best systems to meet your family’s needs. Our installers are trained to the highest standards to ensure the safety and effectiveness of your system. All this is backed by our comprehensive Seilar warranty and the peace of mind you’ll get from dealing with Australia’s solar pioneer.
- Trouble Free – designed and engineered for Aussie conditions
- Independently rated as one of the highest performing panels.
- High efficiency at all output levels
- Designed for maximum power output and optimised for all weather conditions.
* The suggested price is comprised of RRP less the applicable solar incentive and excluding installation. the solar incentive value applies to PVR5100A50 solar power system in Zone 3.
^ Energy savings of up to 8000 kWh/year is based on the average amount energy produced per year by the PVR5100A50 solar power system in Zone 3. Savings and incentives will vary depending upon your location, type of Seilar system installed, orientation and inclination of the solar panels.
† Seilar Warranty Details:
- Solar Panels: 10 years,
- Inverter and Racking: 5 years,
- Labour: 1 year,
- For full warranty details refer to the Seilar Owner’s Guide and Installation Instructions.
|Panel Electrical Characteristics|
|Maximum Power (Pmax)
|Open Circuit Voltage (Voc)||37.6V|
|Short Circuit Current (Isc)||8.95A|
|Maximum Power Voltage (Vmp)||30.5V|
|Maximum Power Current (Imp)||8.42A|
|Module Efficiency (%)||15.5|
|Maximum System Voltage ( IEC )||1000V|
|Dimensions||1665 mm x 991 mm x 38 mm|
|Cell Type and configuration||60 REC PE multi-crystalline cells
3 strings of 20 cells
|Glass||Solar glass with anti-reflection surface treatment|
|Back sheet||Double layer highly resistant polyester|
|Temperature range||-40°C to + 85°C|
|Junction Box||Protection Class IP 67|
|Solahart Warranty||10 years (1 year labour) on panels*|
Solar Inverter Specifications
|Technical data and types: UNO-2.0-I-OUTD|
|Absolute Maximum DC Input Voltage (Vmax,abs)||520 V|
|Start-up DC Input Voltage (Vstart)||200 V [adj. 120…350 V]|
|Operating DC Input Voltage Range (Vdcmin…Vdcmax)||0.7 x Vstart…520 V|
|Rated DC Input Power (Pdcr)||2100 W|
|Number of Independent MPPT||1|
|Maximum DC Input Power for each MPPT (PMPPTmax)||2300 W
Linear Derating From MAX to Null [470≤VMPPT≤520V]
|MPPT Input DC Voltage Range (VMPPTmin… VMPPTmax) at Pacr||200…470 V|
|Maximum DC Input Current (Idcmax) / for each MPPT (IMPPTmax)||12.5 A / 12.5 A|
|Maximum Input Short Circuit Current for each MPPT||15.0 A|
|Number of DC Inputs Pairs for each MPPT||2|
|DC Connection Type||Tool Free PV Connector MC4|
|Reverse Polarity Protection||Yes, from limited current source|
|Input Over Voltage Protection for each MPPT – Varistor||2|
|AC Grid Connection Type||Single phase|
|Rated AC Power (Pacr@cosΦ=1)||2000 W|
|Maximum AC Output Power (Pacmax@cosΦ=1)||2200 W|
|Rated AC Grid Voltage (Vac,r)||230 V|
|AC Voltage Range||180…264 V(1)|
|Maximum AC Output Current (Iac,max)||10.5 A|
|Rated Output Frequency (fr)||50 Hz|
|Output Frequency Range (fmin…fmax)||47…53 Hz(2)|
|Nominal Power Factor (Cosphiac,r)||> 0.990|
|Total Current Harmonic Distortion||< 2%|
|AC Connection Type||Screw terminal block, cable gland M25|
|Anti-Islanding Protection||According to local standard|
|Maximum AC Overcurrent Protection||15.0 A|
|Output Overvoltage Protection – Varistor||2 (L – N / L – PE)|
|Maximum Efficiency (ηmax)||96.3%|
|Weighted Efficiency (EURO)||95.1%|
|Feed In Power Threshold||24.0 W|
|Stand-by Consumption||< 8.0 W(3)|
|Wired Local Monitoring||PVI-USB-RS232_485 (opt.)|
|User Interface||Graphic display|
|Ambient Temperature Range||-25…+60°C with derating above 50°C|
|Relative Humidity||0…100% condensing|
|Noise Emission||< 50 dB(A) @ 1m|
|Maximum Operating Altitude without Derating||2000 m|
|Environmental Protection Rating||IP 65|
|Dimension (H x W x D)||518 mm x 367 mm x 161 mm|
|Mounting System||Wall bracket|
|Isolation Level||HF Transformer|
|Safety and EMC Standard||EN 50178, EN62109-1, EN62109-2, AS/NZS 3100,
AS/NZS 60950, EN 61000-6-2, EN 61000-6-3 EN
61000-3-2, EN 61000-3-3
|Grid Standard||CEI 0-21(4) VDE 0126-1-1, VDE-AR-N 4105(5),
G83/2, EN 50438 (not for all national appendices),
RD1699,AS4777, C10/11, IEC 61727,
ABNT NBR 16149, CLC/FprTS 50549
|Seilar Warranty(6)||5 Years(6)|
Note: Electrical parameter curves are generated from a combination of production and lab data and may not exactly match that of a single test module.
1. The AC voltage range may vary depending on specific country grid standard.
2. The Frequency range may vary depending on specific country grid standard.
3. Night time consumption <0.6W. 4. Since their applicability dates, limited to plant power ≤ 3kW . 5. Limited to plant power ≤ 3.68kVA 6. For full details see Seilar Owner’s Guide and Installation Instructions. Specifications and designs are subject to change without notice.